Best Selling SH15 Series Amorphous Alloy Full Sealed 3 Phase

11Kv 33Kv 800Kva Power Transformer

Product Introduction

S(B)H15 amorphous alloy core distribution transformers are the new type

distribution transformers especially suitable for certain occasions of power

shortage, wide load fluctuation and unreachable maintenance, which adopts

amorphous alloy core instead of traditional laminated iron core, and have the

advantages of much lower loss, strong magnetic induction and stable performance.

S(B)H15 11kv distribution transformers are used for industrial and civil application,

to step down grid voltage 10KV to line voltage 400V, which can serve both indoors

and outdoors at an ambient temperature range -25℃to 40℃.
Product standard: IEC60076 & GB1094 and GB/T6451

Main functions and features

01. S(B)H15 series amorphous alloy full-sealed transformer is a novel energy-saving material made.

02. Oil box is sealed, free from maintenance. Box is sealed, free from maintenance.

03. Use Dyn11 to connect other parts, reduce the influences by network wave, improve the power supply.

04. Compared with S9 series with silicon sheet, the no-load loss of the transformer with amorphous alloy

core is reduced by 70%-80%, no-load current reduced by 20%.

05. The core is clamped with sheet-formed frame structure and the low-voltage coil is of a foil winding

type so as to render a low loss and a high short-circuit withstand.

06. A model S(B)H15 amorphous alloy product adopts a single-frame or three-phase five-legged spiral core.